Question: How can the fence be Cut to Size by the customer?

Answer: Using hack-saw, PVC saw or circular saw

Question: Can the fence be installed around a Ladder?

Answer: See installation instructions. The ladder should be right next to an upright – if there is not an upright at that point a wooden upright should be made to fit in that area.

Question: What is in the Gate Hardware Kit?

Answer: Complete kit PN# 4300419 1 bag of (10) # 2 x 1” screws and (56) #8 x ¾” screws

Question: What is a Top Seat or Top Cap?

Answer: The top rail of the above ground pool between the uprights.

Question: What is the difference between an End Post and a Post?

Answer: An end post only has pre-punched holes on one side so that the rail can fit into it.

Question: What Material is the fence made from?

Answer: Resin

Question: What material are the Screws made of?

Answer: Galvanized Steel (not stainless steel)

Question: Is the Gate self - latching, if not how does it latch?

Answer: Yes, gravity closes if installed correctly.

Question: Are there Post Caps on each end of the vertical fence post?

Answer: No, there is only a post cap on the top of the upright only. The bottom is left open so water will drain out.

Question: What is different about the Cantar Fence compared to GLI?

Answer: Only the brackets have changed. All other parts are compatible.